HOME > Products > Peripheral Series > DAP 2.4

DAP 2.4 - DAP 2.4 series digital audio processor
Main Feature

DAP series uses digital sound processing (DSP) chipset as it’s foundation, a powerful audio processor, it combines many functions and all fits in the 1U size of the container. It has 2 inputs 4 outputs, 2 inputs 6 outputs, four inputs 6 outputs, 4 audio input 8 output matrix models, allowing different varieties dividing mode that are suitable for live performance.

96KHz sampling frequency, 24-bit AD / DA conversion, 32-bit DSP processor,

Computer software interface in both Chinese and English. Ability to control up to a maximum of 250 inter-connected devices over a distance of 1500m via USB and RSS485 port on the spot.

You can have full control using only the control panel or through the eng/chi software control. Store up to 30 different settings by itself or through computer software

Uses 2-way and 4-way balanced inputs, 4-way, 6-way, 8 way balance output, etc, 4 series models.

Input processing section includes noise gate, input gain, mute, 6 -band parametric EQ, phase, delay and other processing unit;

Output processing section includes mute, phase, gain, delay, frequency, 6 -band parametric EQ, limiter and other processing units, can be associated with multiple channels for parameters synchronize adjustment.

All high/low pass filter parameter for each channel can be adjusted independently, allowing real-time non symmetrical divider function.

All input and output matrix configuration can be adjust freely.

Parameter settings can be freely copied between channels.

Chinese installation and user guide is in the software disk. Preset data list can be printed.

Technical Parameters
Input channels and socket2-way XLR
Output channel and socket4-way XLR
Input impedanceBalance : 20KΩ
Output ImpedanceBalance: 100Ω
PC connector1 USB port, 2 RS485 port (RJ-45)
CMRR > 70dB (1KHz)
Input Range ≤ +15 dBu
Frequency response20Hz-20KHz(-0.5dB)
Distortion < 0.01% OUTPUT = 0dBu/1KHz
Channel separation>80dB(1KHz)
Input channel functions :MuteIndependent mute control for each channel
Input channel functions :Gain- 36dB - +12 dB, in steps of 0.1dB
Input channel functions :Noise Gate-120dB - 0dB
Input channel functions :DelayIndependent delay control for each channel. Adjustment range 0-1000ms, < 10ms, in steps of 21μs. ; 10ms-20ms ; in steps of 84μs ; > 20ms ; in steps of 0.5ms
Input channel functions :PolarityNon-inverting (+) Inverting (-)
Input channel functions :BalanceEach input channel have 6 parametric equalizer; Adjusted parameters under PEQ: Mid frequency: 20Hz-20kHz, 239 channel, Bandwidth: 0.05oct-3oct, in steps of + 0.05oct: ± 12dB in steps of 0.1dB
Output channel function:MuteIndependent mute control for each channel
Output channel function:SelectEach output channel can select different input channels; it allows you select any input channels of your choice
Output channel function:Gain-36dB~ +12 dB, in steps of 0.1dB
Output channel function:DelayEach input channel has a single delay control, adjustment range 0-1000ms, less 10ms, in step of 21μs; 10ms-20ms; in steps of 84μs; greater than 20ms, in steps of 0.5ms
Output channel function:PolarityNon-inverting (+) Inverting (-)
Output channel function:BalancedEach output channel can have 6 sets of balanced, balanced method: PEQ / Lo-Shelf / Hi-Shelf
Output channel function:Divider2 Selections option for each output channel. Low pass filter (LPF) and high pass filter (HPF). Filter Type: Linkwitz-Riley / Bessel / Butterworth, frequency turning point: 20Hz-20KHz, a total of 239 frequencies, attenuation slope: 12dB/oct, 18dB/oct, 24dB/oct, 48dB/oct.Filter Type: Linkwitz-Riley / Bessel / Butterworth, frequency turning point: 20Hz-20KHz, a total of 239 frequencies, attenuation slope: 12dB/oct, 18dB/oct, 24dB/oct, 48dB/oct.
Output channel function:LimiterLimiter can be set individually for each output channel limiters, adjustable parameters: threshold : ± 20dBμ, in steps of 0.05dBμ, starting time: 0.3ms-100ms, < 1ms, in steps of 0.1ms; > 1ms, in steps of 0.1ms. Release time: Starting time can be set to 2X, 4X, 6X, 8X, 16X, 32X.
Processor96KHz sampling frequency, 32-bit DSP processor, 24-bit AD/DA conversion
Display2X24cm Blue LCD, 8-segment LED input / output level meter digital display, mute and editing mode
Consumption≤ 25W
PowerAC 200V/240V 50Hz/60Hz
NW / GWNW : 4.1kg / GW : 5kg
ICP备案号: 粤ICP备 330022312-1号